 3.jpg   8,11К
  111 Количество загрузок:
 3.jpg   8,11К
  111 Количество загрузок: Полностью_русская_сборка_OziExplorerCE_2.34.rar   2,81МБ
  1575 Количество загрузок:
 Полностью_русская_сборка_OziExplorerCE_2.34.rar   2,81МБ
  1575 Количество загрузок:Как установить ключ OziExplorerCE 2.34а:
1. Запусти на компе кейген (Скачать кейген) и запусти саму программу OZI на навигаторе.
2. В программе в окне где вводят код, есть ID девайса
3. В кейгене набери имя (обязательно в формате xxxx-xxxx-xxxx - любые латинские буквы, к примеру sdaf-qwer-frty или 1234-5678-9012), ниже вставил ID из программы OZI и нажать кеу
 1.jpg   23,31К
  186 Количество загрузок:
 1.jpg   23,31К
  186 Количество загрузок:4. В программе OZI в окне ввода кода вставляем имя (к примеру sdaf-qwer-frty) и сформированный номер (включить виртуальную клавиатуру кнажав на кнопку КВ в окне ввода ключа).
 2.jpg   29,27К
  116 Количество загрузок:
 2.jpg   29,27К
  116 Количество загрузок:5. Если всё правильно ввели и ключ соотетствует, то появится надпись: Key Code Accepted
6. Запустится программа в нормальном (не demo) режиме
7. Выйти из программы и усыпить навигатор (отправить в сон - ОБЯЗАТЕЛЬНОЕ УСЛОВИЕ)
8. Включить навигатор, запустить OZI и проверить сохранилась ли регистрация. После чего можно его выключитьи ещё раз проверить.
9. После включения радуемся зареганной версией!
10. Остаётся пожелать только удачи!
P.S Если у Вас где-то вместо русских слов отобразятся карякобразы, это говорит о том, что у Вас нет в навигаторе русских шрифтов. В сборке лежит файлик Tahoma.ttf, переименуйте его в Tahoma RU.ttf и в основных настройках OZI укажите этот шрифт. (Файл-Настройки программы-Основные настройки-sys1-шрифт) После перезапуска программы все станет полностью на русском.





 
	 
					 
			
			
 
				
				
			 Кто силён в английском, то вот все изменения:
Release Version 2.34 (September 2010)
Faster Map Indexing on WinCE Core devices (up to 15 times faster). 
The check to see if the Map Index is up to date is now only checked once per session. 
Kinetic map scrolling has been added - the map will continue to scroll if "flinged" with the stylus.
there is a new option on the "Map" tab in "General Settings" configuration. 
kinetic scrolling requires a powerful cpu on high resolution devices. 
for 800x480 screen devices Kinetic scrolling has been turned off by default as performance is not acceptable on some devices. 
Added support for an Alternate serial port driver 
there is a new option on the GPS configuration dialog called "Alt Driver". 
some devices such as the Samsung i900 now need to use the "Alt Driver" (if not using Managed GPS). 
most devices can use either driver. 
the "Managed GPS" always uses its own driver and ignores the "Alt Driver". 
Release Version 2.33/2.33a (June 2010)
2.33a - Fixed freezing issue when language other than English is used with a larger menu size. 
2.33a - Fixed speed display being incorrect when using managed GPS. 
2.33a - Fine tuning of parameters and buttons displayed on the map when the map is expanded. 
Fixed issue where the track point time in the track log file was not being stored in UTC time. 
The time zone is now stored in the track log file, the next version of PC OziExplorer will use this entry to display the track points with the time they were collected. 
Added support for the Microsoft "managed" GPS interface for Pocket PC's / Smartphones. If your PDA has a "Managed" GPS then it will always be found first and used when the "Auto" GPS configuration option is specified. If you do not want to use the "Managed" GPS then the GPS port must be selected manually. 
New configuration options have been added in "General Settings" to allow sizes to be specified for the following items (useful for the devices with high pixel density screens).
Size of the font used for the "Standard menus" 
Size of the Dialogs 
Size of the Toolbars 
Size of the Menubar 
Size of the Keyboard (wince core devices only) 
The screen pages are now resized by scaling to fit the screen rather than by moving the parameters - this givers a better look. 
New API functions have been added for "Start / Stop Navigation" and "Load Route File".
 
Кто силён в английском, то вот все изменения:
Release Version 2.34 (September 2010)
Faster Map Indexing on WinCE Core devices (up to 15 times faster). 
The check to see if the Map Index is up to date is now only checked once per session. 
Kinetic map scrolling has been added - the map will continue to scroll if "flinged" with the stylus.
there is a new option on the "Map" tab in "General Settings" configuration. 
kinetic scrolling requires a powerful cpu on high resolution devices. 
for 800x480 screen devices Kinetic scrolling has been turned off by default as performance is not acceptable on some devices. 
Added support for an Alternate serial port driver 
there is a new option on the GPS configuration dialog called "Alt Driver". 
some devices such as the Samsung i900 now need to use the "Alt Driver" (if not using Managed GPS). 
most devices can use either driver. 
the "Managed GPS" always uses its own driver and ignores the "Alt Driver". 
Release Version 2.33/2.33a (June 2010)
2.33a - Fixed freezing issue when language other than English is used with a larger menu size. 
2.33a - Fixed speed display being incorrect when using managed GPS. 
2.33a - Fine tuning of parameters and buttons displayed on the map when the map is expanded. 
Fixed issue where the track point time in the track log file was not being stored in UTC time. 
The time zone is now stored in the track log file, the next version of PC OziExplorer will use this entry to display the track points with the time they were collected. 
Added support for the Microsoft "managed" GPS interface for Pocket PC's / Smartphones. If your PDA has a "Managed" GPS then it will always be found first and used when the "Auto" GPS configuration option is specified. If you do not want to use the "Managed" GPS then the GPS port must be selected manually. 
New configuration options have been added in "General Settings" to allow sizes to be specified for the following items (useful for the devices with high pixel density screens).
Size of the font used for the "Standard menus" 
Size of the Dialogs 
Size of the Toolbars 
Size of the Menubar 
Size of the Keyboard (wince core devices only) 
The screen pages are now resized by scaling to fit the screen rather than by moving the parameters - this givers a better look. 
New API functions have been added for "Start / Stop Navigation" and "Load Route File".
					
					 
				
				
			 
				
				
			 
				
				
			 
				
				
			 
				
				
			 
				
				
			 
				
				
			 
				
				
			

 
							
